AFTERBURNER Intake Manifold Ford SB Typhoon 29/023/5.0L Black Each #AB54001BK

These Afterburner Black Typhoon Intake Manifold are powerful dual plane manifolds.

For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications.

Finish : Black

Features :

180° dual plane medium rise design for outstanding power from 1500 to 6500 RPM

Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous or fuel injection

Square bore carb bolt pattern for the Holley 4150/4160 style carburetor

Ideal port position - allows custom porting for maximum power

Bridged rear water crossover passage to equalize flow and help keep temperature lower

Has 2 extra tapped water ports at back of intake

Exhaust heat crossover for improved street driveability

100% pressure tested to insure leak free casting

Specifications :

Part Type: Intake Manifolds, Carbureted

Product Line: AFTERBURNER Typhoon Intake Manifolds

Intake Section Included: Complete

Engine Block Deck Height: Standard deck

Carburetor Quantity: One

Intake Style: Dual plane

Basic Operating RPM Range: 1,500-6,500

Intake Port Dimensions: 1.87" x 1.06"

Intake Manifold Height: 4.120 in.

Intake Finish: Black

Intake Material: Aluminum

Quantity: Sold Each

Note : Fel-Pro intake gasket #1250 recommended. Torque manifold bolts to 15-18 ft/lbs only.

This manifold will not fit 255, Boss 302, or 351W engines. It will fit on `83 and later 5.0L H.O. Mustangs and will work with cruise control.

These aftermarket carburetors are not compatible with Ford Automatic Overdrive Trans (AOD). No provision for exhaust heated choke.

It has a rear water crossover with two extra NPT ports.

It also features nitrous bosses. Recommended carburetor is any square bore 600 cfm or 750 cfm model depending upon engine size and degree of changes. 

*Performance improvements do not apply if manifold is used on 1965-'66 289 c.i. Cobra V8s.

Images :